Uniden UM380BK ユーザーズマニュアル

10

English

 x

You cannot transmit while in weather mode. 

 x

To enter weather mode, press 

. 

 x

Weather mode can filter out alerts that do not affect your location if the location code 

(FIPS code) of the alert is entered in your radio (see page 19). If you have no FIPS codes 

programmed into your radio, the radio will notify you of all alerts in any area. 

 x

To turn off the radio’s alert tone, press any button. 

 x

To cancel weather mode and return to the previous marine channel, press the WX-MEM 

button again. 

Weather mode with Weather Alert Watch 
Because weather mode already monitors the weather channels, you don’t need Weather 

Alert Watch to check the weather channel every seven seconds. If you activate Weather Alert 

Watch while operating in weather mode, it operates as a type of “sleep mode”: the radio stays 

on the weather channel and mutes the speaker. If an alert is detected for your area, the radio 

sounds an alert tone and turns the speaker back on. This mode is very useful when you are 

anchoring for the night but want to stay informed of any hazards in your area. 
To turn Weather Alert Watch on or off, press and hold 

 while the radio is idle. 

Select Setup and then WX Alert Mode. Use 

 and 

 to choose WX Alert 

Mode setting ON or Off. 
Weather mode with Triple and Dual Watch 
  If you activate Triple Watch while operating  

in weather mode, the radio checks channels 16 

and 9 every two seconds; with Dual Watch 

turned on, the radio only checks channel 16. 
Press and hold 

 on the radio for two 

seconds to turn Triple/Dual Watch on or off. 

(To change between Triple or Dual Watch, see 

page 18.)  

To display the radio call menu, press 

. To display the radio normal menu, press and 

hold 

. The menu has the following options: 

Every 2 seconds, the 

radio checks channel 9, then channel 16.