Vertex Standard VXA-700 ユーザーズマニュアル
VXA-700 S
PIRIT
O
PERATING
M
ANUAL
8
B
EFORE
Y
OU
B
EGIN
Precautions
¦ This apparatus is capable of two-way communication
on channels used for critical aviation safety commu-
nications. Therefore, it is important that this radio be
kept away from children or other unauthorized users
at all times.
nications. Therefore, it is important that this radio be
kept away from children or other unauthorized users
at all times.
¦ When making DC connections via the (optional) E-
DC-5B DC cable, be absolutely certain to observe
the proper voltage level and polarity guidelines. Do
not connect this radio directly to any 24 ~ 28 Volt DC
source, nor to AC power of any kind. Connecting the
VXA-700 directly to a source which exceeds 15.0
Volts DC will result in damage to the unit.
the proper voltage level and polarity guidelines. Do
not connect this radio directly to any 24 ~ 28 Volt DC
source, nor to AC power of any kind. Connecting the
VXA-700 directly to a source which exceeds 15.0
Volts DC will result in damage to the unit.
¦ Do not dispose of the LI-ion Battery Pack in a fire.
Do not carry a LI-ion Battery Pack in your pocket,
where keys or coins could short the terminals. This
could create a serious fire/burn danger, and possibly
cause damage to the LI-ion pack.
where keys or coins could short the terminals. This
could create a serious fire/burn danger, and possibly
cause damage to the LI-ion pack.
How to Install the Quick Draw Belt Clip
r Connect the hanger to the rear of the VXA-700, with
the notch pointing directly up, using the supplied screw
(Figure 1). Use only the screw included with the clip
to mount the clip to the back of the VXA-700!
(Figure 1). Use only the screw included with the clip
to mount the clip to the back of the VXA-700!
r Clip the Quick-Draw Belt Clip onto your belt (Figure
2).
r To install the VXA-700 into the Quick-Draw Belt Clip,
align the hanger with the Quick-Draw Belt Clip, and
slide the VXA-700 into its slot until a click is heard
(Figure 3).
slide the VXA-700 into its slot until a click is heard
(Figure 3).
r To remove the VXA-700 from the Quick-Draw Belt
Clip, rotate the VXA-700 180 degrees, then slide the
VXA-700 out from the Quick-Draw Belt Clip (Figure
4).
VXA-700 out from the Quick-Draw Belt Clip (Figure
4).
Figure 1
Figure 2
Figure 3
Figure 4