Vertex Standard VXA-700 ユーザーズマニュアル

The FNB-80LI is a high-performance Lithium-Ion bat-
tery providing high capacity in a very compact package.
Under normal use, the FNB-80LI may be used for ap-
proximately 300 charge cycles, after which operating time
may be expected to decrease. If you have an old battery
pack which is displaying capacity which has become di-
minished, you should replace the pack with a new one.

r Install the FNB-80LI as shown in the illustration.
r Close the Battery Pack Latch on the bottom of the

radio.

If the battery has never been used, or its charge is depleted, it
may be charged by connecting the NC-72B/C Battery
Charger, as shown in the illustration, to the EXT DC jack. If
only 12 ~ 16 Volt DC power is
available, the optional E-DC-5B
DC Cable (w/cigarette lighter
plug) or E-DC-6 DC Cable may
also be used for charging the bat-
tery, as shown in the illustration.

The “Now Charging . . .” will
blink in the display while the battery is being charged. When
charging is finished, the display will change to indicate “Com-
plete” and the BUSY/TX indicator will blink blue.

Important Notes:
¦ Do not leave the charger connected to the transceiver

for continuous periods in excess of 24 hours. Long
term overcharging can degrade the LI-ion battery pack
and significantly shorten its useful life.

¦ If using a charger other than the NC-72B/C, or if us-

ing a battery pack other than the FNB-80LI, follow
the appropriate instructions provided with the charger/
battery. Contact your Dealer if you have any doubts
about the appropriateness of the particular charger or
battery pack you intend to use.