Vertex Standard VXA-700 ユーザーズマニュアル

¦ As your battery discharges during use, the voltage will

gradually become lower. When the “

” icon will

blink on the LCD display, the battery pack must be
recharged before further use.

¦ Avoid recharging Li-Ion batteries before the “Low Bat-

tery” indicator is observed, as this can degrade the
charge capacity of your Li-Ion battery pack. Vertex
Standard recommends that you carry an extra, fully-
charged pack with you so you will not lose communi-
cations capability due to a depleted Li-Ion battery.
This “deep cycling” practice will help to maintain
longer overall battery life after many recharging cycles.

The VXA-700 may be operated from your house current
by use of the supplied NC-72B/C Battery Charger. The
NC-72B/C should only be used for reception, because it
is not capable of supplying sufficient current to support
transmission.

To use the NC-72B/C, turn the transceiver off, then plug
the miniature connector of the Battery Charger into the
EXT DC jack on the side of the radio. Now plug the Bat-
tery Charger into the wall outlet. You may now turn on the
transceiver.