Vertex Standard VXA-700 ユーザーズマニュアル
VXA-700 S
PIRIT
O
PERATING
M
ANUAL
44
Programming the Key Assignments
The
key is a user-programmable key that may be set
up for a pair of functions you use particularly frequently.
The default
The default
key functions, as set up at the factory,,
have been assigned to the ANL feature (press key) and to
the “Large Font” feature (press and hold key) at the fac-
tory. These may be changed by the user, if you wish to
utilize another function or functions.
the “Large Font” feature (press and hold key) at the fac-
tory. These may be changed by the user, if you wish to
utilize another function or functions.
To program the function assigned to a key:
r Press the
r Press the
key, then press the
key to activate
the Menu (“SET”) mode.
r Rotate the DIAL selector knob to select Menu Item
“5. Key Set,” then press the
key..
r Rotate the DIAL selector knob to select Sub Menu
Item “4. USER 1” (for the “press key” function) or
“5 USER 2” (for the “press and hold key” function),
then press the
“5 USER 2” (for the “press and hold key” function),
then press the
key..
r Press the
key again to enable adjustment of this
Menu Item.
r Rotate the DIAL selector knob to select the function
you wish to assign to the button you selected in the
previous step. The available choices are:
previous step. The available choices are:
ANL:
Activates the Automatic Noise Limiter
in the AM mode.
in the AM mode.
TX Power:
Selects the FM transmit power output
level on the 2-m Amateur band.
level on the 2-m Amateur band.
ARTS:
Instantly recalls the “ARTS” Menu Item.
XFER:
Exchanges the display locations be-
tween the “frequency” and “Alpha-nu-
meric Tag” modes while operate on the
“Memory,” “Book Memory,” and “WX”
modes. This also may be used to ex-
change the display location between the
“frequency” and “Course Indicator and
TO/FROM flag” options while operat-
ing on the “NAV” band.
tween the “frequency” and “Alpha-nu-
meric Tag” modes while operate on the
“Memory,” “Book Memory,” and “WX”
modes. This also may be used to ex-
change the display location between the
“frequency” and “Course Indicator and
TO/FROM flag” options while operat-
ing on the “NAV” band.
SPEC Start: Activates the Spectrum Scope Monitor
feature.
Large Font: Switches the frequency display between
the “Large Character” and “Small Char-
acter” modes.
acter” modes.
None
r When you have made your selection, press the
key to save the new setting, then press the PTT key
repetitively until the radio exits to normal operation.
repetitively until the radio exits to normal operation.
M
ISCELLANEOUS
S
ETTING