Vertex Standard VXA-700 ユーザーズマニュアル

Default TX/BUSY illumination colors have been assigned
at the factory. These may be changed by the user, if you
wish to utilize another custom-designed color hue. The
Red, Green, and Blue elements of each color’s composi-
tion may be adjusted individually!

r Press the 

 key, then press the 

 key to activate

the Menu (“SET”) mode.

r Rotate the DIAL selector knob to select Menu Item

“1. Display,” then press the 

 key..

r Rotate the DIAL selector knob to select Sub Menu

Item “8. RX LED” when you wish to change the BUSY
indicator’s color, or Sub Menu Item “9. TX LED” when
you wish to change the TX indicator’s color, then press
the 

 key..

r Press the 

 key again to enable adjustment of the

selected Menu item.

r Rotate the DIAL selector knob to adjust the “R” (red)

element of the color; you will be able to see the ef-
fects of your changes. The degree of color hue is des-
ignated in a numerical scale of “000” through “255,”
and you may adjust the display’s red component until
it is just the way you want it. As you make the adjust-
ment, you will be able to see the effects of your
changes.

r Press the 

 key again, then rotate the DIAL selec-

tor knob to adjust the “G” (green) element of the color.

r Repeat the process described above to adjust the “B”

(blue) element of the color.

r Press the 

 key to save the new setting, then press

the PTT key repetitively until the radio exits to nor-
mal operation.

Note: You may also change the indicator’s color of the
Emergency lamp, Weather Alert lamp, and Over-Heating
lamp by the Menu Items. See page 51 for details.