Mitsubishi Electronics FR-F700-NA ユーザーズマニュアル

Operation panel (FR-DU07)

During PU operation mode and External/PU combined operation mode (Pr. 79 = "3"), push the setting dial (

) to

display the set frequency currently set.

Changing example Change the Pr. 1 Maximum frequency .

 are displayed ... Why?

 appears. ...... Write disable error

 appears. ...... Write error during operation

 appears. ...... Calibration error
 appears.  ..... Mode designation error

For details refer to page 334.

⋅ The number of digits displayed on the operation panel (FR-DU07) is four. Only the upper four digits of values can be displayed

and set. If the values to be displayed have five digits or more including decimal places, the fifth or later numerals cannot be
displayed nor set.
(Example) When Pr.1
When 60Hz is set, 60.00 is displayed.
When 120Hz is set, 120.0 is displayed. The second decimal places cannot be displayed nor set.

When  Pr. 77 Parameter write selection = "0 (initial setting)," the parameter setting change is only available while the inverter is
stopped under the PU operation mode. To enable the parameter setting change while the inverter is running or under the
operation mode other than PU operation mode, change the Pr. 77 setting.

1.

Screen at powering ON

     The monitor display appears.

Display

Operation

3.

Press         to choose the parameter 

     setting mode.

4.

Pr. 1) appears.

7.

Press        to set.

5.

Press        to read the present set value.

     "            "(initial value) appears.

6.

Turn        to change it to the set 

     value "            ".

PU indication is lit.

2.

Press        to choose the PU operation

     mode.

· Press        to show the setting again.

· Press        twice to show the next parameter.

· Turn         to read another parameter.

The parameter 
number read
previously appears.

· Press        twice to return the monitor to frequency monitor.

to