Belkin 8000I ユーザーズマニュアル

 

 

24 

Northstar 8000i System - 12" Display Processor Installation Manual 

Functionality 

•  Plays Music CDs, Music DVDs, MP3,  
•  Plays DVD Movies, Video CDs 
•  Loads Music on to 8000i system media location. 
•  Loads new system software. 

Place in 8000i System 

The DVD-CD player is not a network device. The media in the drive is only accessible by the 
processor it is connected to.  

The unit connects to the 8000i system via the supplied USB cable. It requires ships' DC power 
and the 8000i processor to be on to operate. 

Optional Parts 

If both 8000i processor USB ports are used, a NS004720 4 Port USB Hub may be used (see 
"Northstar 8000i 4 Port USB Hub" page 21) 

Location Guide 

Location should have easy access to the slot loading mechanism. 

Locate  no more than a 16.5 ft (5 m) Cable run away from the processor, USB Hub, or 15" 
Monitor it is attached to. 

Access to power: The DVD requires 10 V DC - 35 V DC. Current Draw 7 W Use a 5 Amp breaker

Mounting 

The DVD/CD Player can be flush mounted into a panel or be free standing. For installation 
information, see the Northstar 8000i DVD-CD Player Installation Manual. 

Power Requirements 

Voltage: 10 V DC - 35 V DC: current draw 7 W 

 

 

 

 

Description 

The Northstar 8000i Remote Keypad is a control interface for the 8000i System. It duplicates 
the controls of the 12" Display Processor and is mainly used to control the Northstar 8000i 
Black Box Processor, however it can be used as a second control for a 12" Display Processor 

Place in 8000i System 

It connects to the 8000i processor via USB. It can be connected to any 8000i processor, a 
Northstar 8000i 15" Monitor or to a Northstar 8000i USB Hub. The unit is self powered 
through the USB Cable 

Optional Parts 

If both processor, and or 15" Monitor USB ports are full use NS004720 4 Port USB Hub