Belkin 8000I ユーザーズマニュアル
67
Northstar 8000i System - 12" Display Processor Installation Manual
10.6 Set the system preferences
10.6.1 Select the time format
You can use the 12 hour or 24 hour time format. 24 hour is the default.
To select the time format:
1. Select
Display
.
2. Select
Setup
from the control panel.
3. Select
+ System
to display a list of system specification options.
4. The
Time Format
button shows the current setting. Select the button if you want
to change the setting and a drop down list of choices appears.
5. Select the new setting. The new setting is applied immediately and stays until you
change it again.
6. When you are finished, select
– System
.
10.6.2 Select your time zone
To select your time zone:
1. Select
Display
.
2. Select
Setup
from the control panel.
3. Select
+ System
to display a list of system specification options.
4. The
Time Zone
button shows the current setting offset from GMT. Select
EDIT
if
you want to change the setting and enter the offset using the onscreen keyboard.
5. Select
OK
to confirm the new setting. The new setting is applied immediately and
stays until you change it again.
6. When you are finished, select
– System
.
10.6.3 Turn the keypad beeps on or off
You can have the 8000i beeps On or Off. On is the default.
To turn the beeps on or off:
1. Select
Display
.
2. Select
Setup
from the control panel.
3. Select
+ System
to display a list of system specification options.