Belkin 8000I ユーザーズマニュアル

 

 

69

Northstar 8000i System - 12" Display Processor Installation Manual 

Alternatively: 

1.  If you are using a 12" Display Processor, press the 

 key briefly to display a list 

of options, then use the directional arrows to select 

. Use the rotary 

knob to change the setting. 

 

You can choose whether to show or hide the top control bar along the top of the screen. 
(The buttons in the top control bar duplicate the keys.)  

If you change this setting, the 8000i will restart automatically. 

 To show or hide the top control bar: 

1. Select 

, then select 

 from the control panel. 

2. Select 

 to display a list of installation specification options.  

3. The 

 check box shows the current setting.  

4.  Select the check box if you want to toggle to the other setting. The 8000i restarts 

automatically and the new setting stays until you change it again. 

5.  When you are finished, select 

 

 

The following important information about your vessel should already be set up as part of 
the installation process, but you can change any of this if necessary. 

 

 

If you do not enter an accurate draft AND an accurate safe depth, the "Depth Below Keel" 

alarm will not work correctly and your vessel is at risk of grounding.  

To calculate the safe depth, use the draft of your vessel and then add  

a safety margin. 

 

 To specify your vessel statistics: 

1. Select 

. 

2. Select 

 from the control panel. 

3. Select 

 to display the current settings for the: 

ƒ 

Cruising Speed 

ƒ 

Draft 

ƒ 

Safe Depth (vessel draft, plus a safety margin) 

4. Select 

 next to the item that you want to change, then use the online 

keyboard to enter the new setting. Press 

 to return to the vessel statistics 

options. 

5.  The new setting is applied immediately and stays until you change it again. If you 

want to change another setting, repeat the previous step. 

6.  When you are finished, select 

. 

 

You must enter the location of the media library so that the 8000i can find your stored music 
and videos. 

 To set the location of the media library: 

1. Select 

.