Belkin 8000I ユーザーズマニュアル

 

 

72 

Northstar 8000i System - 12" Display Processor Installation Manual 

5. Select 

 to confirm the new name. The 8000i restarts with the new name. The 

setting stays until you change it again.  

 

The screen resolution can be changed on the 8000i Black Box Processor to match the 
monitor it is attached too. Default is 1024 x 768. Other options are 800 x 600 and 1280 x 720. 
If you change the screen resolution, the 8000i must be restarted to apply the new setting. 

 To set the screen resolution: 

1. Select 

. 

2. Select 

 from the control panel. 

3. Select 

 to display a list of system specification options.  

4. The 

 button shows the current setting. Select the button if you 

want to change the setting and a drop down list of choices appears.  

5.  Select the new setting and select 

 to confirm. The 8000i restarts with the new 

screen resolution. The setting stays until you change it again.  

6.  When you are finished, select 

. 

 

You can select from Knots, mph, or kph for speed units. Knots is the default. 

 To select the speed units: 

1. Select 

. 

2. Select 

 from the control panel. 

3. Select 

 to display a list of unit specification options.  

4. The

 button shows the current setting. Select the button if you want to 

change the setting and a drop down list of choices appears.  

5.  Select the new setting. The new setting is applied immediately and stays until you 

change it again.  

6.  When you are finished, select 

. 

 

You can select from Feet, Meters, or Fathoms for depth units. Feet is the default. 

 To select the depth units: 

1. Select 

. 

2. Select 

 from the control panel. 

3. Select 

 to display a list of unit specification options.  

4. The 

 button shows the current setting. Select the button if you want to 

change the setting and a drop down list of choices appears.  

5.  Select the new setting. The new setting is applied immediately and stays until you 

change it again. 

6.  When you are finished, select 

. 

 

You can select from PSI, Bar, or hPa for pressure units. PSI is the default. 

 To select the pressure units: 

1. Select 

.