Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Belkin
  4. 8000I
  5. ユーザーズマニュアル

Belkin 8000I ユーザーズマニュアル

ダウンロード
ページ / 88
 
 
73
Northstar 8000i System - 12" Display Processor Installation Manual 
2. Select 
Setup
 from the control panel. 
3. Select 
+ Units
 to display a list of unit specification options.  
4. The 
Pressure Units
 button shows the current setting. Select the button if you 
want to change the setting and a drop down list of choices appears.  
5.  Select the new setting. The new setting is applied immediately and stays until you 
change it again. 
6.  When you are finished, select 
– Units
. 
 
10.14.4 Select the volume units for liquids 
You can select from US Gallons, Liters, or Imperial Gallons for volume units for measuring 
liquids. US Gallons is the default. 
 To select the volume units for liquids: 
1. Select 
Display
. 
2. Select 
Setup
 from the control panel. 
3. Select 
+ Units
 to display a list of unit specification options.  
4. The 
Liquid Volume Units
 button shows the current setting. Select the button if 
you want to change the setting and a drop down list of choices appears.  
5.  Select the new setting. The new setting is applied immediately and stays until you 
change it again. 
6.  When you are finished, select 
– Units
. 
 
10.14.5 Select the large scale distance units 
You can select from Nautical Miles, Statute Miles, or Kilometers for large scale distances. 
Nautical Miles is the default.  
 To select the large scale distance units: 
1. Select 
Display
. 
2. Select 
Setup
 from the control panel. 
3. Select 
+ Units
 to display a list of unit specification options.  
4. The 
Distance Units
 button shows the current setting. Select the button if you want 
to change the setting and a drop down list of choices appears.  
5.  Select the new setting. The new setting is applied immediately and stays until you 
change it again. 
6.  When you are finished, select 
– Units
. 
 
10.14.6 Select the small scale distance units 
You can select from Yards, Feet, or Meters for small scale distances. Yards is the default.  
 To select the small scale distance units: 
1. Select 
Display
. 
2. Select 
Setup
 from the control panel. 
3. Select 
+ Units
 to display a list of unit specification options.  
4. The 
Distance Units Small
 button shows the current setting. Select the button if 
you want to change the setting and a drop down list of choices appears.  
5.  Select the new setting. The new setting is applied immediately and stays until you 
change it again. 
6.  When you are finished, select 
– Units
.