Belkin 8000I ユーザーズマニュアル

 

 

82 

Northstar 8000i System - 12" Display Processor Installation Manual 

You can restore the: 

ƒ 

global settings that are stored on the master unit. This option deletes all the 
changes that you've made and resets all the display units in your 8000i System 

ƒ 

local settings. This option affects only the display unit that you're currently using 

ƒ 

routes, tracks, and waypoints information if the data has been corrupted. 

 

This function will restore the operating system firstly back to factory defaults the it will apply 
any software patches that have been installed post factory. 

 

 To  restore the system processor: 

1.  Start the Northstar 8000i System processor 
2. Select 

 

3.  Wait for the Northstar 8000i Installation environment to start. This can take up to 

five minutes. 

4.  To restore the system select 

  

5.  To upgrade, select the source listed on the screen (this could be the DVD drive or 

other mass storage device that the upgrade file is located on). 

6.  The system will prompt you to confirm. Select 

.  

7.  The upgrade files will be copied across to the 8000i processor. This will take 

approximately five to six minutes 

8.  Once this is done the system will reboot automatically and the files are installed 

into the system, this should take approximately four to five minutes. 

9.  A message appears: "System resealed OK to Reboot?" Select 

.  

10. The system will restart and the Northstar 8000i screen will appear. This will take up 

to three minutes for the first time following a upgrade.