Belkin 8000I ユーザーズマニュアル

 

 

84 

Northstar 8000i System - 12" Display Processor Installation Manual 

7. Select 

 

8.  When the upgrade screen appears select 

 to continue. or 

. (optionally use 

the 

 or

 on the keypad to continue or cancel)  

9.  When the system has finished copying files you will be prompted to  remove the 

USB pen drive and power down the processor 

10. Start the processor for the changes to take effect 

 

 

 Software patch: multi-processor system MASTER 

1.  Upgrade the Software on the Master Processor First as outlined above. if you 

don't want to upgrade the other processors at this stage power them down before 
upgrading the master.  

NOTE: All processors on the network must have the same software version. Once the master 
has being upgraded, all other units wont function until they have being upgraded 

 Software patch: multi-processor system Client. 

1.  Once the master has been upgraded. Power up the client processor. The upgrade 

will commence automatically. Files will be copied from the master and installed on 
to the client. 

2.  If the client processor was running when the master was upgraded it will display 

am message saying the software is incompatible with the master and prompt you 
to upgrade. Power down the unit and restart. The upgrade will commence 
automatically 

 

 System image upgrade 

1.  Start the 8000i processor and wait till system has finished loading and is running 

normally 

2.  Back up user settings (recommended) 
3.  Make sure there are no USB pen drives or other USB mass storage devices attached 

to the system. This can cause problems and possibly result in a mass storage device 
losing its data 

4.  Start the 8000i processor and wait till system has finished loading and is running 

normally 

5.  Make sure the 8000i DVD is connected to the processor being upgraded. Insert the 

image DVD (this can be obtained from your Northstar dealer. 

6. Select 

. 

7. Select 

. 

8. Select 

 

9.  Acknowledge that there is no software upgrade available and go to image upgrade 

page by selecting