Polycom SIP 2.2.0 ユーザーズマニュアル

Administrator’s Guide SoundPoint IP / SoundStation IP 

4 - 50

A local phone-based configuration web server is available, unless it is disabled 

through sip.cfg. It can be used as the only method of modifying phone 

configuration or as a distributed method of augmenting a centralized 

provisioning model. For more information, refer to 

. 

The phone’s local user interface also permits many application settings to be 

modified, such as SIP server address, ring type, or regional settings such as 

time/date format and language.

Changes made through the web server or local user interface are stored 

internally as overrides. These overrides take precedence over settings 

contained in the configuration obtained from the boot server.
If the boot server permits uploads, these override setting will be saved in a file 

called <Ethernet address>-phone.cfg on the boot server as well in flash 

memory.

Local Web 
Server Access

Point your web browser to http://<phoneIPAddress>/.

Configuration pages are accessible from the menu along the top banner. 

The web server will issue an authentication challenge to all pages except for 
the home page.

Credentials are (case sensitive):

User Name:  Polycom

Password: The administrator password is used for this.

Local Settings 
Menu Access

Some items in the Settings menu are locked to prevent accidental changes.  
To unlock these menus, enter the user or administrator passwords.

The administrator password can be used anywhere that the user password is 
used.

Factory default passwords are:

User password: 123

Administrator password: 456

Administrator 
password 
required.

Network Configuration
SIP Configuration
SSL Security settings
Reset to Default - local configuration, device settings, and file system format

User password 
required.

Restart Phone

Local configuration changes will continue to override the boot server-derived 
configuration until deleted through the Reset Local Config menu selection.