Renesas R5S72621 ユーザーズマニュアル
Section 25 NAND Flash Memory Controller
Page 1310 of 2108
R01UH0134EJ0400 Rev. 4.00
Sep
24,
2014
SH7262 Group, SH7264 Group
Bit Bit
Name
Initial
Value R/W
Value R/W
Description
5 TRREQF0 0
R/(W)* FLDTFIFO Transfer Request Flag
Indicates that a transfer request is issued from
FLDTFIFO.
FLDTFIFO.
This bit is a flag. 1 cannot be written to this bit. Only 0
can be written to clear the flag.
can be written to clear the flag.
0: Indicates that no transfer request is issued from
FLDTFIFO
1: Indicates that a transfer request is issued from
FLDTFIFO
4
STERINTE 0
R/W
Interrupt Enable at Status Error
Enables or disables an interrupt request to the CPU
when a status error has occurred.
when a status error has occurred.
0: Disables the interrupt request to the CPU by a
status error
1: Enables the interrupt request to the CPU by a status
error
3
RBERINTE 0
RW
Interrupt Enable at R/
B Timeout Error
Enables or disables an interrupt request to the CPU
when a timeout error has occurred.
when a timeout error has occurred.
0: Disables the interrupt request to the CPU by an R/
B
timeout error
1: Enables the interrupt request to the CPU by an R/
B
timeout error
2
TEINTE
0
R/W
Transfer End Interrupt Enable
Enables or disables an interrupt request to the CPU
when a transfer has been ended (TREND bit in
FLTRCR).
when a transfer has been ended (TREND bit in
FLTRCR).
0: Disables the transfer end interrupt request to the
CPU
1: Enables the transfer end interrupt request to the
CPU