Multitech MTCBA-Xx-EN2-GP ユーザーズマニュアル

 

Chapter 3 – Using the Web Management Software 

76 

MultiModem rCell User Guide  

Next Hop is the address of the next device in a routing table’s path that moves a packet to its 

destination. You can configure this setting or leave it as a static value: 0.0.0.0. When not configured, the value is 
set to the Gateway of the Box/Gateway configured on the Interface/Right IP. The selection is based on the Left 
and Right IP. 

Select the Interface to initiate the IPSec tunnel (Left Security Gateway). 

Select the internal subnet of the local security gateway for which the security services are to be 

provided. If the router acts as a host, configure as None. Other options are Any, LAN, LAN Interface, WAN 1, WAN 
1 Interface.

Select the interface in which the IPSec tunnel ends. In the case of Road Warriors with a 

Dynamic IP addresses, set to ANY. Other options include: LAN, LAN Interface, WAN 1, WAN 1 Interface, and None. 

FQDN is a Fully Qualified Domain Name that resolves to the Local Wan IP of the router or in the case of 

GRE/IPSEC, it is used to identify the Wan IP of the remote location. This is provided by your ISP or created by you 
if you are using a Dynamic DNS service. When FQDN is selected, leave the Remote Gateway IP blank. 

This is the internal subnet of the remote security gateway for which the security services are to be 

provided. If the remote end is a host, set to None.

Check this option to enable broadcasts over the connection. This allows computers on the 

network to share Microsoft file and printer sharing information.

Click Save to save these settings.