Aprilaire 8355 ユーザーズマニュアル

7. Drill the marked holes using a 3/16" drill bit. NOTE: Enclosed plastic

8. Tap plastic anchors into the holes.

9. Align base with plastic anchors and feed wires through opening.

See Fig 4.

10. Secure base to wall with supplied screws.

11. Connect wires to terminal strip. Refer to wiring diagrams on other

side of this sheet. Make sure wire connections are secure.

12. Install two "AA" ENERGIZER brand batteries or equivalent into 

battery compartment. Be sure to match positive (+) ends of batteries
with positive (+) battery terminals in the battery compartment. 

13. Replace cover onto thermostat by snapping into place.

14. Turn on power to system. Test thermostat as described in the 

following section.

4