Ariston OK 997E LDP AUS S ユーザーズマニュアル

With the FAST CLEAN mode, the internal temperature of the 
oven reaches 500°C. The pyrolytic cycle is activated, burning 
away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic 
cleaning cycle as surfaces may become very hot. Particles 
may ignite inside the oven as a result of the combustion 
process. There is no cause for concern: this process is both 
normal and hazard-free.

Before initiating the FAST CLEAN mode:
•  clean the oven door;
•  remove large or coarse food residues from the inside of 

the oven using a damp sponge. Do not use detergents;

•  remove all accessories and the sliding rack kit (where 

present);

•  do not place tea towels or pot holders over the oven 

handle.

 If the oven is too hot, the pyrolytic cycle may not start. 

Wait for the oven to cool down.

 The programme may only be started once the oven door 

has been closed.

The desired Fast Clean mode will be confirmed and started 

automatically if the CLOCK icon button is not pressed within 
10 seconds from selecting the cooking time

To activate the Fast Clean programme:

1. Switch the control panel on by pressing the 

 icon.

2. Press the 

 icon; the display will show the text “Piro”, 

“nor” and the default duration of 1:30 h (normal cycle) 
alternately.

3. Press the 

 icon, then turn the TIMER knob to adjust 

the default cleaning level. There are 3 different levels to 
choose from, each with a pre-set duration which cannot 

be modified:

1. Economy (ECO): turn the knob towards “-”. Duration 1 
hour.
2. Normal (NOR): initial level. Duration 1 hour and 30 
minutes.
3. Intensive (INT): turn the knob towards “+”. Duration 2 
hours.

4. Press the 

 icon to confirm.

5. Press the 

 icon to begin the cleaning cycle.

An end time for the FAST CLEAN cycle (as for a normal 
cooking cycle) may be programmed (see Programming the 
automatic cleaning end time).

Safety devices
•  the door locks automatically as soon as the temperature 

reaches a high value; the 

 icon lights up on the 

display;

•  pressing the 

 icon cancels the cleaning cycle at any 

time;

•  if a malfunction occurs, the heating elements will be 

switched off;

•  once the oven door has been locked, you cannot change 

the duration and end time settings.

1. Press the 

 icon twice: the 

 icon and the numerical 

digits on the display will begin to flash.

2. Turn the TIMER knob towards   and   to adjust the 
cleaning end time value.
3. Once you have reached the desired end time, press 

the 

 icon again. The display will show the duration, the 

cleaning end time and the set cleaning level alternately.

4. Press the 

 icon to activate the programmed mode.

Programming has been set when the 

 and 

 buttons 

are illuminated.

5. Once cleaning has finished, “END” appears on the display 

and a buzzer sounds.
•  For example: it is 9:00 a.m. and the Economy (ECO) 

FAST CLEAN level has been selected, with the default 
duration of 1 hour. 12:30 is scheduled as the end time. 
The programme will start automatically at 11:30 a.m.

To cancel programming press the 

 icon.

Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait 

for the 

 icon to switch off: this indicates the oven 

temperature has dropped to an acceptable level. You will 
notice some white dust deposits on the bottom and the sides 
of your oven; remove these deposits with a damp sponge 
once the oven has cooled down completely. Alternatively, 
you can make use of the already heated oven, in which 
case it is not necessary to remove the deposits, they are 
completely harmless and will not affect your food in any way.