Cirkuit Planet ICA-108W ユーザーズマニュアル

                                                                                                 

Mask, and Gateway: 

Status: 

Shows the Status of PPPoE connection. 

 

RTSP is a streaming control protocol, and a starting point for negotiating transports such as RTP, 
multicast and Unicast, and for negotiating codecs. RTSP can be considered a "remote control" for 
controlling the media stream delivered by a media server. RTSP servers typically use RTP as the 
protocol for the actual transport of audio/video data. 

 

Choose the RTSP port. The RTSP protocol allows a connecting client to start 
a video stream. Enter the RTSP port number to use. The default value is 
554.

RTP Port: 

Specify the range of transmission port number of video stream. The default 
range is 50000 to 50999. User can specify a number between 1024 and 
65535. 

To use the 3GPP function, in addition to previous section, you might need more information or 
configuration to make this function work. 

NOTE:  To use the 3GPP function, it strongly recommends installing the Networked Device 

with a public and fixed IP address without any firewall protection. 

RTSP Port: 

Port 554 is the default for RTSP service. However, sometimes, some service 
providers change this port number for some reasons. If so, user needs to 
change this port accordingly.   

Dialing procedure:   

 

 

1. Choose a verified player (PacketVideo or Realplayer currently) 

2. Use the following URL to access:    rtsp://host/mpeg4/media.3gp   

 40