Cirkuit Planet ICA-108W ユーザーズマニュアル

                                                                                                 

The domain name is applied of this device. 

The user name is used to log into DDNS. 

The password is used to log into DDNS. 

 

PPPoE: Stands for Point to Point Protocol over Ethernet 

A standard builds on Ethernet and Point-to-Point network protocol. It allows IR IP Camera connect 
to Internet with xDSL or cable connection; it can dial up your ISP and get a dynamic IP address. 
For more PPPoE and Internet configuration, please consult your ISP. 

It can directly connect to the xDSL, however, it should be setup on a LAN environment to program 
the PPPoE information first, and then connect to the xDSL modem. Power on again, then the 
device will dial on to the ISP connect to the WAN through the xDSL modem.   

The procedures are   

• Connect to a LAN by DHCP or Fixed IP   

• Access the device, enter Setting 

ΠNetwork Î PPPoE as below 

 

PPPoE: 

To enable or disable the PPPoE service here. 

User Name: 

Type the user name for the PPPoE service which is provided by 
ISP. 

Password: 

Type the password for the PPPoE service which is provided by 
ISP. 

Shows the IP information got from PPPoE server site. 

 39