Philips DS3880W/10 ユーザーズマニュアル
14
Switch DS3880W to Assisted Wi-Fi
Setup mode
Setup mode
Note
Before you press any button on DS3880W, make sure
that DS3880W has been booted up successfully (see
‘Turn DS3880W on’ on page 11).
that DS3880W has been booted up successfully (see
‘Turn DS3880W on’ on page 11).
Press and hold Wi-Fi SETUP on the back
of DS3880W for more than 5 seconds.
of DS3880W for more than 5 seconds.
» The Wi-Fi SETUP indicator blinks
green and yellow alternately.
» A new Wi-Fi network created by
DS3880W will appear, with the
network name (SSID) of Philips Fidelio
AirPlay.
network name (SSID) of Philips Fidelio
AirPlay.
» It may take up to 45 seconds for
successful creation of this new Wi-Fi
network.
network.
5
DS3880W based on the settings you
wrote on paper at step 1 (see ‘Change the
internal Wi-Fi settings of DS3880W’ on
page 17).
wrote on paper at step 1 (see ‘Change the
internal Wi-Fi settings of DS3880W’ on
page 17).
6
to your existing home Wi-Fi settings (see
‘Restore your Wi-Fi enabled device back to
your existing home Wi-Fi setting’ on page 18).
‘Restore your Wi-Fi enabled device back to
your existing home Wi-Fi setting’ on page 18).
Collect settings of your home Wi-Fi
router
router
Note
Always consult the user manual of your home Wi-Fi
router for detailed instructions.
router for detailed instructions.
1
Connect your Wi-Fi enabled device to
your existing home Wi-Fi network.
2
Launch the Internet browser (for example,
Apple Safari or Microsoft Internet
Explorer) on your Wi-Fi enabled device.
Explorer) on your Wi-Fi enabled device.
3
<
!
home Wi-Fi router.
4
Find the Wi-Fi settings tab and write down
the following information on paper:
A Network name (SSID)
B Wi-Fi security mode (usually WEP,
B Wi-Fi security mode (usually WEP,
WPA or WPA2 if enabled)
C Wi-Fi password (if Wi-Fi security is
enabled)
D DHCP mode (enabled or disabled)
E Static IP address settings (if DHCP
E Static IP address settings (if DHCP
mode is disabled)
EN