Philips BTS7000/10 データシート
9
English
EN
Option 1: Connect audio through a
digital optical cable
Best quality audio
Using an optical cable, connect the OPTICAL
connector on the left speaker of this product
to the OPTICAL OUT connector on the TV or
other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1
Using a coaxial cable, connect the
COAXIAL connector on the left speaker
of this product to the COAXIAL/DIGITAL
OUT connector on the TV or other
device.
• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
TV
4 Use your
product
This section helps you use this product to play
audio from connected devices.
Before you start
Before you start
• Make the necessary connections described
in the quick start guide and the user manual.
• Switch this product to the correct source
for other devices.
Adjust the volume
1
1
Press VOL +/- to increase or decrease a
volume level.
• To mute sound, press (Mute).
• To restore the sound, press (Mute)
again or press VOL +/-.
»
If the volume is set to the minimum,
the white LED on the speaker blinks
in full brightness and in half brightness
alternatively.
»
If the volume is set to the maximum, the
white LED on the speaker blinks twice.
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SURR. SOUND ON/OFF to turn
surround mode on or off.
• On: Create a surround listening
experience.
• Off: Two-channel stereo sound. Ideal
for listening to music.