Philips BTS7000/10 データシート

10 EN

Equalizer

Change the high frequency (treble) and low 

frequency (bass) settings of this product.

1 

Press TREBLE +/- or BASS +/- to change 

the frequency.

 

»

If the treble or bass is set to the 

maximum or minimum, the white LED 

on the speaker blinks twice.

2 

To reset the bass and treble to the default 

setting, press RESET  .

Synchronize picture and sound

If the audio and video are not synchronized, 

delay the audio to match the video.

1 

Press AUDIO SYNC +/- to synchronize 

the audio with the video.

•  AUDIO SYNC + increases the sound 

delay, and AUDIO SYNC - decreases 

the sound delay.

 

»

If the value of sound delay is set to the 

maximum or minimum, the white LED 

on the speaker blinks twice.

MP3 player

Connect your MP3 player to play your audio 

files or music.
What you need

•  An MP3 player.

•  A 3.5mm stereo audio cable.

1 

Using the 3.5mm stereo audio cable, 

connect the MP3 player to the AUDIO IN 

connector on the left speaker.

2 

Press AUDIO IN.

3 

Press the buttons on the MP3 player to 

select and play audio files or music.

•  On the MP3 player, it is recommended 

to set the volume in the range of 80% 

maximum volume.

Play music via Bluetooth

Through Bluetooth, connect your product with 

a Bluetooth device (such as an iPad, iPhone, 

iPod touch, Android phone, or laptop), and then 

you can listen to the audio files stored on the 

device through the speakers of this product.
What you need

•  A Bluetooth device which supports 

Bluetooth profile A2DP, and with Bluetooth 

version as 3.0 (EDR).

•  The operational range between the 

main unit (left and right speakers) and 

a Bluetooth device is approximately 

10 meters (30 feet).

1 

Press   Bluetooth on the remote control 

to switch this product to Bluetooth mode.

 

»

The blue LED on the left speaker 

blinks.

2 

On the Bluetooth device, switch on 

Bluetooth, search for and select Philips 

BTS7000 to start connection (see the user 

manual of the Bluetooth device on how to 

enable Bluetooth).

 

»

During connection, the blue LED on 

the left speaker blinks.

3 

Wait until you hear a beep sound from this 

product.

 

»

The blue LED on the left speaker lights 

up.

 

»

If the connection fails, the blue LED on 

the left speaker blinks continually.

4 

Select and play audio files or music on 

your Bluetooth device.

•  During play, if a call is coming, music 

play is paused. Play resumes when the 

call ends.

•  If music streaming is interrupted, place 

the Bluetooth device closer to this 

product.