Philips WAS7000/05 ユーザーズマニュアル
15
English
3. Installation
3.1 Place Station
With detachable stand and by-packed wall
mounting kits, WAS7000 Station allow you to
place them in two ways: on desktops with stand
or on wall without stand.
mounting kits, WAS7000 Station allow you to
place them in two ways: on desktops with stand
or on wall without stand.
(on desktop with stand)
or
(on wall without stand)
To learn more about wall mounting, see
16. How to mount your Station onto wall.
16. How to mount your Station onto wall.
IMPORTANT!
– Before you decide where and how to
place your
– Before you decide where and how to
place your
Station
, try the Wi-Fi
connection and rear connections to find
a suitable location.
a suitable location.
3.2 Setting up Wi-Fi connection
between Center and Station
between Center and Station
You can add a station to an existing Wi-Fi
network of Center and Station. Up to 5
WAS7000 stations can be connected to a
WAC7000 Center.
network of Center and Station. Up to 5
WAS7000 stations can be connected to a
WAC7000 Center.
1
The first time you set up a Wi-Fi connection,
place the Center and Station side by side on a
flat and firm surface.
place the Center and Station side by side on a
flat and firm surface.
2
a. Connect the Center to power supply
b. Connect the Station to power supply
➜
Auto installation/connection starts
➜
HD screen appears on the Center
➜
HD screen appears on the Station when the
Station is connected to the Center
3
Unplug the Center and Station. Relocate as
desired.
desired.
IMPORTANT!
– Make sure that you have already
powered up the Center before powering
up the Station.
– Avoid installing between thick walls.
The Center and Station should never be
blocked by 2 or more walls.
– Avoid placing the system near to large
metal objects.
– For better Wi-Fi reception, turn the
Wi-Fi antenna, or adjust the location of
the Center and Station.
– Always press and hold
– Make sure that you have already
powered up the Center before powering
up the Station.
– Avoid installing between thick walls.
The Center and Station should never be
blocked by 2 or more walls.
– Avoid placing the system near to large
metal objects.
– For better Wi-Fi reception, turn the
Wi-Fi antenna, or adjust the location of
the Center and Station.
– Always press and hold
STANDBY-ON
2
to switch the set to
ECO POWER
(power-saving mode) before removing its
power plug.
power plug.
pg001-043_was7000_UK 2006.12.4 6:11 PM Page 15