Philips WAS7000/05 ユーザーズマニュアル
16
English
3. Installation
3.3 Rear connections
Warning:
– Never make or change the connections
when the mains is switched on.
– Never make or change the connections
when the mains is switched on.
3.3.1 Connecting antennas
1
Extend the wire antenna and fit it to the FM
ANTENNA as shown below
ANTENNA as shown below
2
(Optional) To improve FM reception, fit the plug
of the wire antenna into the plug of the
of the wire antenna into the plug of the
extension line (sold separately) as shown below
3
Extend the extension line and move it in
different positions for optimal reception (as far
away as possible from the TV,VCR or other
radiation sources)
different positions for optimal reception (as far
away as possible from the TV,VCR or other
radiation sources)
4
Fix end of the extension line to the ceiling
3.3.2 Connecting a USB mass storage
device
On Station, you can playback music from a USB
mass storage device.
mass storage device.
1
Insert the USB device’s USB plug into the socket
on the Station
For the devices with USB cable:
●
Insert one plug of the USB cable (not supplied)
to the socket
on the Station
●
Insert the other end of the USB cable into the
USB output terminal of the USB device
USB output terminal of the USB device
3
To playback music from the USB device, press
SOURCE once or more times to select USB
source (see 8. External source)
SOURCE once or more times to select USB
source (see 8. External source)
Helpful hints:
The Station only supports USB devices that adhere
to the following standards:
– USB MSC ( Type ‘0’ )
– File system in FAT12/ FAT16/ FAT32
– Operations based on simple folder based
navigation (also known as a normal FAT file
system), and not based on proprietary track
database.
The following USB devices will not be supported by
the Station:
– MTP based or Dual mode (adhering to both the
to the following standards:
– USB MSC ( Type ‘0’ )
– File system in FAT12/ FAT16/ FAT32
– Operations based on simple folder based
navigation (also known as a normal FAT file
system), and not based on proprietary track
database.
The following USB devices will not be supported by
the Station:
– MTP based or Dual mode (adhering to both the
MSC and MTP standards) devices, as the
Station does not support browse, play and
export functions using the MTP protocol.
Station does not support browse, play and
export functions using the MTP protocol.
– Products with database based UI (Artists,
Albums and Genre based navigation) as these
products normally store music files in a specific
hidden folder and uses embedded proprietary
track database that the Station is unable to
read properly.
products normally store music files in a specific
hidden folder and uses embedded proprietary
track database that the Station is unable to
read properly.
pg001-043_was7000_UK 2006.12.4 6:11 PM Page 16