Electrolux E30GF74HPS オーナーマニュアル

The oven is vented 

guard. When the oven is on, warm air is 

released through the vent. This venting 

is necessary for proper air circulation in 

the oven and good baking results.

Oven vent

 Always arrange the oven racks when the oven is cool (prior to operating the oven). Always use 

oven mitts when using the oven.

Removing non-sliding oven Racks 

Simply pull the rack and slightly tilt it upward when the rack hits its stop position.

Replacing non-sliding oven Racks 

Insert the rack into the oven rack supports by inserting the rack openings into the rack sup-

ports. Be sure the rack is at the same position on each oven rack support on both sides.

Insert the openings 

into the rack support

To remove the oven rack supports for a self-clean cycle, 

pull up the support from the oven rack support brackets to 

disengage supports from the oven. If the rack supports are not 

removed, the self-clean cycle won’t start. Always remove the 

left side support first. 

To install oven rack supports insert the 

rack supports into the rack support brackets on the oven side 

as shown. 

Racks 

oven). Always use oven mitts when 

using the oven.

To remove an oven rack, pull the 

rack forward. Lift up the rack off the 

oven rack slider.

rack, place the rack on the slider into 

the 4 pinholes located at the 4 corners 

of the rack.

Oven Rack 

Support Bracket