Electrolux EAS(C,E)12C2ASK(W,S,M) ユーザーズマニュアル

Push this button to start 

operation, push the button again to 
stop operation.
MODE: 

Each time you push the 

button, a mode is selected in a 
sequence that goes from AUTO, 
COOL*, DRY, HEAT and FAN, as the 
following figure indicates:

Only for heating and cooling 

models.
SWING: 

Push this button, the 

louver would swing up and down 
automatically. Push again to stop it.
SLEEP: 

Press this button to go into 

the Energy-Saving operation mode. 
Press it again to cancel. This 
function is only can be used on 
COOL, HEAT and AUTO mode and 
maintain the most comfortable 
temperature for you.
Note: 

While the unit is running 

under SLEEP operation mode, it 
would be canceled if you press the 
other button.
FOLLOW ME             (on some 
models): 

Push this button to initiate 

the Follow Me feature, the remote 
display is actual temperature at its 
location. The remote control will 
send this signal to the air 
conditioner every 3 minutes interval 
until press the Follow Me button 
again. The air conditioner will beep 
to indicate the Follow Me feature 
has ended if it does not receive the 
signal during any 7 minute interval.

Remote control description

35 electrolux remote control description

Press this button to 

change the swing angle of the 
louver. The swing angle of the 
louver is 6o for each press. When 
the louver swing at a certain 
angle which would affect the 
cooling and heating effect of the 
air conditioner, it would 
automatically change the swing 
direction . No symbol will appear 
in the display area when press 
this button.
RESET: 

When you press the 

recessed RESET button, all 
current settings are cancelled and 
the control will return to the initial 
settings.
TEMP/TIME: 

Push the        

button to increase the indoor 
temperature setting or to adjust 
the TIMER in a clockwise 
direction. Push       the button to 
decrease the indoor temperature 
setting or to adjust the TIMER in 
a counter-clockwise direction.
FAN SPEED: 

Used to select the 

Fan Speed in four steps- AUTO, 
LOW, MED or HIGH. Each time 
the button is pressed, the fan 
speed mode is shifted.

This button is used to 

preset the time ON(start to 
operate) and the time OFF(turn off 
the operation).

 electrolux 36

AUTO     COOL

DRY

HEAT*

FAN

AUTO      LOW

MED

HIGH