Electrolux EAS(C,E)12C2ASK(W,S,M) ユーザーズマニュアル

Clock adjustment

Before you start operating the air conditioner, set the clock of the remote 
controller using the procedures given in this section. The clock panel on the 
remote controller will display the time regardless of whether the air conditioner 
is in use or not.

Initial setting of the clock
1. After batteries are inserted in the 

remote controller, the clock panel 
will display "12:00" and begin to 
flash.

2. Press          or        buttons to set 

time.

3. Each time you press the button, the 

time moves forward or backward 
by one minute depending on which 
side you press. The time alters as 
quickly as you push the button.

4. Keep pressing the button without 

releasing, the time moves forward 
or backward by 10 minutes 
depending on which side you 
press.

5. When the right time is achieved, 

press the CLOCK button or release 
the        or       and wait for 5 
seconds, the clock time stops 
flashing and the clock starts 
operating.

Readjusting the clock
1. Press the CLOCK button on the 

remote controller for about 3 
seconds, the colon in the clock 
display will start to flash. To set the 
new time, follow 2 and 5 of "Initial 
Setting of the clock".

1. The time of the CLOCK must be set 

before the AUTO-TIMER feature will 
operate. The CLOCK time can not 
be adjusted after setting the AUTO-
ON/OFF timer.

2. Clock accuracy is within 15 

seconds per day.

3. Static electricity or other factors (in 

case of extremely high voltage) can 
cause remote controller clock 
initialize. If your remote controller is 
initialized (flashing "12:00"), readjust 
the clock before you start operation.

39 electrolux clock adjustment 

How the air conditioner works

Automatic operation
When the Air Conditioner is ready for use, switch on the power and the 
OPERATION indicator lamp on the display panel of the indoor unit starts 
flashing.
1. Use the MODE .select button to select AUTO.
2. Push the TEMP button to set the desired room temperature. The most 

comfortable temperature setting are between 21ºC o to 28ºC.

3. Push the ON/OFF button to start the air conditioner. The OPERATION lamp 

on the display panel of the indoor unit lights. The

operating mode is AUTO FAN SPEED is automatically set and there are no 

indicators shown on the display panel of the remote controller.

4. Push the ON/OFF button again to stop the unit operation.

COOL / HEAT and FAN ONLY operation
1. If the AUTO mode is not comfortable, you may manually override the settings 

by using COOL, HEAT* or FAN** ONLY modes.

2. Push the TEMP button to set the desired room temperature. When in COOL 

mode, the most comfortable settings are 21ºC or above. When in HEAT 
mode, the most comfortable settings are 28 C or b elow.

3. Push the FAN SPEED to select the FAN mode of AUTO, HIGH, MED or LOW.
4. Push the ON/OFF button, the operation lamp lights and the air conditioner 

start to operate as your settings. Push the ON/OFF button again to stop this 
unit operation.

  * Nota: Only for heating and cooling models
  **Note: The FAN ONLY mode can not be used to control the temperature. 

While in this mode, only steps 1,3 and 4 may be performed.

1.  When you set the air conditioner in AUTO mode, it will automatically select cooling, 

heating(cooling/heating models only), or fan only operation depending on what 
temperature you have selected and the room temperature.

2.  The air conditioner will control room temperature automatically round the temperature 

point set by you.

3.  If the AUTO mode is uncomfortable, you can select desired conditions manually.

 electrolux 40