TallyGenicom 2440 ユーザーガイド

4-12

INTERFACE menu

BUFFER

2KBYTE/16KBYTE/
64KBYTE/128KBYTE/
256KBYTE

Selects the size of the interface buffer.

I/F TYPE

PARALLEL/USB/ 
SERIAL/ETHERNET/ 
AUTO

Selects the type of interface to the com-
puter.
AUTO: All interfaces are ready for com-
munication. The printer communicates 
with the interface from which it first 
receives data. The interface is active until 
the input buffer becomes empty.

PAPER EMPTY

OFFLINE
ONLINE

Sets printer to offline or online mode 
after paper empty.

PARALLEL

NIBBLE/UNI DIR/ 
M307/TGNet III

Selects the transmission mode of the 
parallel interface.

I-PRIME

BUFFER PRINT/
BUFFER CLEAR/
INVALID

Behavior of the printer after receiving an 
Init/Prime signal.

BAUD RATE

4800 BPS/9600 BPS/19200 
BPS/38400 BPS

The baud rate is in bits per second. 
Select the same baud rate as that used by 
your computer or modem.

PARITY

NONE/EVEN/ODD

Parity setting; select the same word par-
ity setting that is used by your computer 
or modem.
None causes transmission in both direc-
tions without parity bit. Even: The bytes 
are checked to ensure they have even 
parity. Odd: The bytes are checked to 
ensure they have odd parity.

DATA BIT

8 BIT/7 BIT

Word Length setting; select the same 
word length setting that is used by your 
computer or modem.
8 bit: 8 Data bits per data byte. 7 bit: 7 
Data bits per data byte.

STOP BIT

1/2

Word Length setting; select the same 
word length setting that is used by your 
computer or modem.
Selcts 1 or 2 stop bit per data byte.

PROTOCOL

READY/BUSY
XON/XOFF

Selects the type of protocol, i.e. a certain 
set of rules and procedures for ensuring 
error-free data exchanges between com-
puter and printer.