TallyGenicom 2440 用户指南
Set-Up mode
Special mode
4-12
INTERFACE menu
Parameter
Value
Description
BUFFER
2KBYTE/16KBYTE/
64KBYTE/128KBYTE/
256KBYTE
64KBYTE/128KBYTE/
256KBYTE
Selects the size of the interface buffer.
I/F TYPE
PARALLEL/USB/
SERIAL/ETHERNET/
AUTO
SERIAL/ETHERNET/
AUTO
Selects the type of interface to the com-
puter.
AUTO: All interfaces are ready for com-
munication. The printer communicates
with the interface from which it first
receives data. The interface is active until
the input buffer becomes empty.
puter.
AUTO: All interfaces are ready for com-
munication. The printer communicates
with the interface from which it first
receives data. The interface is active until
the input buffer becomes empty.
PAPER EMPTY
OFFLINE
ONLINE
ONLINE
Sets printer to offline or online mode
after paper empty.
after paper empty.
PARALLEL
NIBBLE/UNI DIR/
M307/TGNet III
M307/TGNet III
Selects the transmission mode of the
parallel interface.
parallel interface.
I-PRIME
BUFFER PRINT/
BUFFER CLEAR/
INVALID
BUFFER CLEAR/
INVALID
Behavior of the printer after receiving an
Init/Prime signal.
Init/Prime signal.
BAUD RATE
4800 BPS/9600 BPS/19200
BPS/38400 BPS
BPS/38400 BPS
The baud rate is in bits per second.
Select the same baud rate as that used by
your computer or modem.
Select the same baud rate as that used by
your computer or modem.
PARITY
NONE/EVEN/ODD
Parity setting; select the same word par-
ity setting that is used by your computer
or modem.
None causes transmission in both direc-
tions without parity bit. Even: The bytes
are checked to ensure they have even
parity. Odd: The bytes are checked to
ensure they have odd parity.
ity setting that is used by your computer
or modem.
None causes transmission in both direc-
tions without parity bit. Even: The bytes
are checked to ensure they have even
parity. Odd: The bytes are checked to
ensure they have odd parity.
DATA BIT
8 BIT/7 BIT
Word Length setting; select the same
word length setting that is used by your
computer or modem.
8 bit: 8 Data bits per data byte. 7 bit: 7
Data bits per data byte.
word length setting that is used by your
computer or modem.
8 bit: 8 Data bits per data byte. 7 bit: 7
Data bits per data byte.
STOP BIT
1/2
Word Length setting; select the same
word length setting that is used by your
computer or modem.
Selcts 1 or 2 stop bit per data byte.
word length setting that is used by your
computer or modem.
Selcts 1 or 2 stop bit per data byte.
PROTOCOL
READY/BUSY
XON/XOFF
XON/XOFF
Selects the type of protocol, i.e. a certain
set of rules and procedures for ensuring
error-free data exchanges between com-
puter and printer.
set of rules and procedures for ensuring
error-free data exchanges between com-
puter and printer.