Alcatel-Lucent 6850-48 ネットワークガイド
Configuring IP Multicast Switching
Modifying IPMS Parameters
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
page 42-17
You can also restore the IGMP router timeout on the specified VLAN by entering:
-> ip multicast vlan 2 router-timeout 0
Or, as an alternative, enter:
-> ip multicast vlan 2 router-timeout
To restore the IGMP router timeout to its default value.
Modifying the Source Timeout
The default source timeout (i.e., the expiry time of IP multicast sources) is 30 seconds. The following
subsections describe how to configure a user-specified source timeout value and restore it by using the
subsections describe how to configure a user-specified source timeout value and restore it by using the
Configuring the Source Timeout
followed by the new value. For example, to set the source timeout to 360 seconds on the system if no
VLAN is specified, you would enter:
VLAN is specified, you would enter:
-> ip multicast source-timeout 360
You can also modify the source timeout on the specified VLAN by entering:
-> ip multicast vlan 2 source-timeout 360
Restoring the Source Timeout
To restore the source timeout to its default (i.e., 30 seconds) value on the system if no VLAN is specified,
use the
use the
command by entering:
-> ip multicast source-timeout 0
Or, as an alternative, enter:
-> ip multicast source-timeout
To restore the source timeout to its default value.
You can also restore the source timeout on the specified VLAN by entering:
-> ip multicast vlan 2 source-timeout 0
Or, as an alternative, enter:
-> ip multicast vlan 2 source-timeout
To restore the source timeout to its default value.