Alcatel-Lucent 6850-48 参照ガイド
Ethernet OAM Commands
OmniSwitch CLI Reference Guide
September 2009
page 28-23
ethoam endpoint priority
Configures the priority values for CCMs and Linktrace Messages (LTMs) transmitted by a MEP.
ethoam endpoint mep_id domain {domain_name | mac_address} association association_name prior-
ity ccm_ltm_priority
ity ccm_ltm_priority
Syntax Definitions
mep_id
Specifies the Maintenance Association End Point. The valid range is
1–8191.
1–8191.
domain_name
Specifies the domain name. For more information on the different
formats of the domain name, refer to
formats of the domain name, refer to
mac_address
Specifies the CFM system MAC address.
association_name
Name of the Ethernet OAM Association. Up to 48 (minus the domain
name length) characters may be used.
name length) characters may be used.
ccm_ltm_priority
Priority value for CCMs and LTMs transmitted by the MEP. The valid
range is 1–7.
range is 1–7.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
The mep_id should be unique amid all those used by or available to the service provider in the specified
MA.
MA.
Examples
-> ethoam endpoint 100 domain esd.alcatel-lucent.com association alcatel-sales
priority 6
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; mac_address parameter added.
Release 6.3.1; mac_address parameter added.
parameter
default
ccm_ltm_priority
7