Alcatel-Lucent 6850-48 参照ガイド
LINK OAM Commands
OmniSwitch CLI Reference Guide
September 2009
page 29-17
efm-oam errored-frame-period
Configures the threshold, window frame values and the status for notification when the number of frame-
errors exceed the threshold in a given period of time (specified) by window. When the number of frame
errors exceeds a threshold within a given window defined by a number of frames (for example, 10 frames
out of 1000 had errors), an Errored Frame Period event is generated.
errors exceed the threshold in a given period of time (specified) by window. When the number of frame
errors exceeds a threshold within a given window defined by a number of frames (for example, 10 frames
out of 1000 had errors), an Errored Frame Period event is generated.
efm-oam port slot/port[-port2] errored-frame-period [threshold threshold_symbols] [window
window_frames] [notify {enable | disable}]
window_frames] [notify {enable | disable}]
Syntax Definitions
slot/port
The slot number for the module and the physical port number on that
module (e.g. 3/1 specifies port 1 on slot 3).
module (e.g. 3/1 specifies port 1 on slot 3).
-port2
The last port number in a range of ports that you want to configure on
the same slot. (e.g. 3/1-4 specifies ports 1,2,3 and 4 on slot 3).
the same slot. (e.g. 3/1-4 specifies ports 1,2,3 and 4 on slot 3).
threshold_symbols
Specifies the frame error threshold number. The range supported is 1 to
maximum 4 byte integer value (4294967295).
maximum 4 byte integer value (4294967295).
window_frames
Specifies the number of frames used to define a window within which
the frame period errors are measured.
the frame period errors are measured.
enable
Enables notification of the Errored Frame Period event.
disable
Disables notification of the Errored Frame Period event.
Defaults
The default for window_frames depends on the port-types. The default, minimum and maximum
supported values for various port-types are:
supported values for various port-types are:
Platforms Supported
OmniSwitch 6400, 6850, 6855.
parameter
default
threshold_symbols
1 frame error
enable | disable
enable
port-type
default value
minimum value
maximum value
100 mbps
200000
20000
12000000
1000 X
2000000
200000
120000000
1000 T
2000000
200000
120000000
10 Gig
20000000
2000000
1200000000