Alcatel-Lucent 6850-48 参照ガイド

LINK OAM Commands

OmniSwitch CLI Reference Guide

page 29-19

Configures an error frame threshold or window on a LINK OAM port and set notification status for 
errored frame events. When the number of frame errors exceeds a threshold within a given window 
defined by a period of time (for example, 10 frames in 1 second had errors), an Errored Frame Event is 
generated. 

efm-oam port slot/port[-port2] errored-frame [threshold threshold_symbols] [window 
window_seconds] [notify {enable | disable}]

The slot number for the module and the physical port number on that 
module (e.g. 3/1 specifies port 1 on slot 3).

The last port number in a range of ports that you want to configure on 
the same slot (e.g 3/1-4 specifies ports 1,2,3, and 4 on slot 3). 

Specifies the frame error threshold number.

Specifies the window of time, in which the frame errors will be 
measured. The duration should be in units of 100ms.

Enables notification of the Errored Frame event.

Disables notification of the Errored Frame event.

OmniSwitch 6400, 6850, 6855.

• The various options, threshold, window and notify can be issued in any order. However, at least one 

option has to be entered.

• To enter many ports in a single command, use a hyphen to specify a range of ports (e.g. 3/1-16).

-> efm-oam port 1/1 errored-frame threshold 10 window 32 notify enable

-> efm-oam port 1/1 errored-frame notify disable

-> efm-oam port 2/1-4 errored-frame threshold 10 window 32 notify enable

-> efm-oam port 2/1-2 errored-frame notify disable

threshold_symbols  1 frame error

1 second (10 dsec)

enable