Alcatel-Lucent 6850-48 参照ガイド

LINK OAM Commands

OmniSwitch CLI Reference Guide

page 29-21

Configures the threshold, window and notify-status for errored-frame-seconds-summary on a port. The 
Errored Seconds are the time in seconds in which at least one frame error has occurred.

efm-oam port slot/port[-port2] errored-frame-seconds-summary [threshold threshold_seconds] 
[window window_seconds] [notify {enable | disable}]

The slot number for the module and the physical port number on that 
module (e.g. 3/1 specifies port 1 on slot 3).

The last port number in a range of ports that you want to configure on 
the same slot (e.g 3/1-4 specifies ports 1,2,3, and 4 on slot 3). 

Specifies the frame error threshold number.

Specifies the window of time in which the frame errors will be 
measured.

Enables notification of the Errored Frame Seconds Summary event.

Disables notification of the Errored Frame Seconds Summary event.

OmniSwitch 6400, 6850, 6855.

• The various options, threshold, window and notify can be issued in any order. However, at least one 

option has to be entered. 

• To enter many ports in a single command, use a hyphen to specify a range of ports (e.g. 3/1-16).

-> efm-oam port 1/1 errored-frame-seconds-summary threshold 1 window 700 notify 

enable

-> efm-oam port 1/1 errored-frame-seconds-summary notify disable

-> efm-oam port 2/1-4 errored-frame-seconds-summary threshold 1 window 700 notify 

enable

-> efm-oam port 2/1-2 errored-frame-seconds-summary notify disable

1 errored frame second

60 seconds. (600 dsec).

enable