Alcatel-Lucent 6850-48 参照ガイド
BFD Commands
OmniSwitch CLI Reference Guide
September 2009
page 39-3
ip bfd-std status
Enables or disables the global BFD protocol status for the switch.
ip bfd-std status {enable | disable}
Syntax Definitions
enable
Enables BFD.
disable
Disables BFD.
Defaults
By default, BFD is disabled for the switch.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Disabling BFD does not remove the existing BFD configuration from the switch.
• When BFD is disabled, all BFD functionality is disabled for the switch, but configuring BFD is still
allowed.
• Configuring BFD global parameters is not allowed when BFD is enabled for the switch.
Examples
-> ip bfd-std status enable
-> ip bfd-std status disable
Release History
Release 6.3.4; command was introduced.
Related Commands
MIB Objects
alaBfdGlobalAdminStatus
Displays the BFD global status and general configuration parameters.