Alcatel-Lucent 6850-48 参照ガイド

BFD Commands

page 39-4

OmniSwitch CLI Reference Guide

Configures the global transmit time interval for BFD control packets. This command specifies the mini-
mum amount of time BFD waits between each transmission of control packets. 

ip bfd-std transmit transmit-interval

The transmit time interval, in milliseconds. The valid range is 100–999.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• The transmit time interval is also configurable at the BFD interface level. Note that configuring the 

global value with the ip bfd-std transmit command does not override the value set for the interface 
using the ip bfd-std interface transmit command.

• The global transmit time interval serves as the default interval value for a BFD interface. The default 

interval value is overridden when a specific value is configured for the interface. 

-> ip bfd-std transmit 500

Release 6.3.4; command was introduced.

alaBfdGlobalTxInterval

100 milliseconds

Configures the transmit time interval for a specific BFD interface.

Displays the BFD global status and general configuration parameters.