Alcatel-Lucent 6850-48 参照ガイド
BGP Commands
OmniSwitch CLI Reference Guide
September 2009
page 44-121
ip bgp policy route-map
Creates or deletes a policy route map.
ip bgp policy route-map name sequence_number
Syntax Definitions
name
Route map name. Case-sensitive.
sequence_number
Route map sequence number in the range of 1 to 255. The sequence
number allows for multiple instances of the same route map name.
number allows for multiple instances of the same route map name.
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• This command creates policy route maps. Each route map can be configured using the following match
commands to specify the match criteria by which routes are allowed to pass. Match criteria is exam-
ined in the order the commands are listed below.
ined in the order the commands are listed below.
1.
2.
3.
4.
5.
6.
7.
• Each route map can also be configured using the following set commands to sequentially specify the
actions to be taken when a match is found.
•
•
•
•
•
•
•