Alcatel-Lucent 6850-48 参考指南

BGP Commands

OmniSwitch CLI Reference Guide

page 44-121

Creates or deletes a policy route map.

ip bgp policy route-map name sequence_number

Route map name. Case-sensitive.

Route map sequence number in the range of 1 to 255. The sequence 
number allows for multiple instances of the same route map name.

N/A

OmniSwitch 6850, 6855, 9000, 9000E

• This command creates policy route maps. Each route map can be configured using the following match 

commands to specify the match criteria by which routes are allowed to pass. Match criteria is exam-
ined in the order the commands are listed below.

1.

2.

3.

4.

5.

6.

7.

• Each route map can also be configured using the following set commands to sequentially specify the 

actions to be taken when a match is found.