Alcatel-Lucent 6850-48 参照ガイド
PIM Commands
page 45-112
OmniSwitch CLI Reference Guide
September 2009
show ipv6 pim candidate-rp
Displays the IPv6 multicast groups for which the local router advertises itself as a Candidate-RP.
show ipv6 pim candidate-rp
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
N/A
Examples
-> show ipv6 pim candidate-rp
RP Address Group Address Priority Interval Status
------------------+---------------+---------+---------+--------
3000::11 FF00::/8 192 60 enabled
Release History
Release 6.3.1; command was introduced.
output definitions
RP Address
An IPv6 unicast address that is advertised as the Candidate-Rendezvous
Point (RP).
Point (RP).
Group Address
The IPv6 multicast group address along with the prefix length. This is
the group for which the local router advertises itself as a C-RP.
the group for which the local router advertises itself as a C-RP.
Priority
The C-RP router’s priority. The lower the value, the higher the priority.
Interval
The time interval at which the C-RP advertisements are sent to the
BSR.
BSR.
Status
The current status of this entry. The status is shown as enabled only if
the IPv6 PIM-SM is globally enabled and the IPv6 PIM interface is
enabled.
the IPv6 PIM-SM is globally enabled and the IPv6 PIM interface is
enabled.