Alcatel-Lucent 6850-48 参照ガイド
Multicast Routing Commands
page 47-8
OmniSwitch CLI Reference Guide
September 2009
show ip mroute-boundary
Displays scoped multicast address boundaries for the switch’s router interfaces.
show ip mroute-boundary
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
N/A
Examples
-> show ip mroute-boundary
Interface Name Interface Address Boundary Address
--------------+------------------+------------------
vlan-4 214.0.0.7 239.1.1.1/32
Release History
Release 6.1; command was introduced.
output definitions
Interface Name
The name of the interface on which the boundary is assigned. Packets
with a destination address in the associated address/mask range will not
be forwarded from this interface.
with a destination address in the associated address/mask range will not
be forwarded from this interface.
Interface Address
The IP address of this interface where the boundary is assigned.
Boundary Address
The scoped multicast address that, when combined with the boundary
mask, identifies the scoped boundary range. The boundary’s subnet
mask is shown using the CIDR prefix length: 255.0.0.0 equals /8;
255.255.0.0 equals /16; 255.255.255.0 equals /24.
mask, identifies the scoped boundary range. The boundary’s subnet
mask is shown using the CIDR prefix length: 255.0.0.0 equals /8;
255.255.0.0 equals /16; 255.255.255.0 equals /24.