Alcatel-Lucent 6850-48 参照ガイド
Multicast Routing Commands
page 47-10
OmniSwitch CLI Reference Guide
September 2009
show ipv6 mroute-boundary
Displays IPv6 scoped multicast boundaries which are configured on the system.
show ipv6 mroute-boundary
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
N/A
Examples
-> show ipv6 mroute-boundary
Interface Name Boundary Address/Prefix Length
--------------------------------+-------------------------------
vlan-5 ff06::/16
vlan-8 ff08::/16
Release History
Release 6.3.4; command was introduced.
output definitions
Interface Name
The name of the interface on which the boundary is assigned. Packets
with a destination address in the associated address/mask range will not
be forwarded from this interface.
with a destination address in the associated address/mask range will not
be forwarded from this interface.
Boundary Address
The IPv6 group address which when combined with the prefix length
identifies the group range for which the scoped boundary exists.
identifies the group range for which the scoped boundary exists.