Alcatel-Lucent 6850-48 参照ガイド

QoS Policy Commands

page 53-120

OmniSwitch CLI Reference Guide

Associates a destination port group with a policy condition. 

policy condition condition_name destination port group group_name

policy condition condition_name no destination port

The name of the condition. May be an existing condition name or a new 
condition.

The name of the destination port group. Port groups are configured 
through the policy port group command. See 

 for more 

information about this command.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

Use the no form of the command to remove a destination port group from a condition; however, at least 
one classification parameter must be associated with a condition.

-> policy condition cond6 destination port group portgr4

Release 6.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Configures a port group and its associated slot and port numbers.

Creates a policy condition.

Shows information about policy conditions configured on the switch.