Alcatel-Lucent 6850-48 参照ガイド

IP Multicast Switching Commands

OmniSwitch CLI Reference Guide

page 55-39

Enables or disables IGMP spoofing on the specified VLAN or on the system if no VLAN is specified.

ip multicast [vlan vid] spoofing [{enable | disable}]

no ip multicast [vlan vid] spoofing

VLAN on which to apply the configuration.

Enable IGMP spoofing.

Disable IGMP spoofing.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove an IGMP spoofing entry on the specified VLAN or on the 

system and return to its default behavior.

• If the IGMP spoofing is already enabled on the system, then the VLAN configuration will override the 

system's configuration.

• IGMP spoofing refers to replacing a client's MAC and IP address with the system's MAC and IP 

address when proxying aggregated IGMP group membership information.

• You can also restore the IGMP spoofing to its default (i.e., disabled) setting on the system if no VLAN 

is specified, by using only ip multicast spoofing (e.g., ip multicast spoofing).

• You can also restore the IGMP spoofing to its default (i.e., disabled) setting on the specified VLAN, by 

using only ip multicast vlan vid spoofing (e.g., ip multicast vlan 2 spoofing).

-> ip multicast spoofing enable

-> ip multicast spoofing disable

-> ip multicast spoofing

-> ip multicast vlan 2 spoofing enable

-> ip multicast vlan 2 spoofing disable

-> ip multicast vlan 2 spoofing

-> no ip multicast vlan 2 spoofing

enable | disable