Alcatel-Lucent 6850-48 参照ガイド

IP Multicast Switching Commands

OmniSwitch CLI Reference Guide

page 55-41

Enables or disables IGMP zapping on the specified VLAN or on the system if no VLAN is specified.

ip multicast [vlan vid] zapping [{enable | disable}]

VLAN on which to apply the configuration.

Enable IGMP zapping.

Disable IGMP zapping.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• If the IGMP zapping is already enabled on the system, then the VLAN configuration will override the 

system's configuration.

• IGMP zapping refers to processing membership, immediate source filter removals and will not wait for 

the protocol's specified time period. This mode facilitates IP TV applications looking for quick changes 
between IP multicast groups.

• You can also restore the IGMP querying to its default (i.e., disabled) setting on the system if no VLAN 

is specified, by using only ip multicast zapping (e.g., ip multicast zapping).

• You can also restore the IGMP querying to its default (i.e., disabled) setting on the specified VLAN, 

by using only ip multicast vlan vid zapping (e.g., ip multicast vlan 2 zapping).

-> ip multicast zapping enable

-> ip multicast zapping disable

-> ip multicast zapping

-> ip multicast vlan 2 zapping enable

-> ip multicast vlan 2 zapping disable

-> ip multicast vlan 2 zapping

Release 6.1.1; command was introduced.