Alcatel-Lucent 6850-48 参照ガイド

CMM Commands

page 1-6

OmniSwitch CLI Reference Guide

Copies the running configuration (RAM) to the working directory.

N/A

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E 

• This command is used to copy the changes made using the CLI commands from the running 

configuration (RAM) to the working directory.

• This command is only valid if the switch is running from the working directory. Use the 

 command to check from where the switch is running.

• This command performs the same function as the 

 command.

Note. The saved boot.cfg file will be overwritten if the 

 command is executed after the 

 commands, in an OmniSwitch set up with redundant CMMs.

-> configure copy running-config working

Release 6.1; command was introduced.