Alcatel-Lucent 6850-48 参照ガイド

CMM Commands

OmniSwitch CLI Reference Guide

page 1-9

Copies the running configuration (RAM) to the working directory, certifies the primary CMM and 
synchronizes the primary and secondary CMM.

N/A

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• This command is a combination of the ‘write memory’ and ‘copy working certified flash-synchro’ 

commands and does the following:

1 Copies the running configuration (RAM) to the working directory.

2 Overwrites the contents of the certified directory on the primary CMM with the contents of the work-
ing directory on the primary CMM.

3 Synchronizes the primary and secondary CMMs.

• This command is only valid if the switch is running from the working directory. Use the 

 command to check from where the switch is running.

-> write memory flash-synchro

Release 6.3.4; command was introduced. 

Copies the running configuration (RAM) to the working directory.

Copies the startup primary flash version of the CMM software to the 
startup secondary flash version of the CMM software.