Alcatel-Lucent 6850-48 参照ガイド

ページ / 3444
Ethernet Port Commands
page 19-100
OmniSwitch CLI Reference Guide
September 2009
show interfaces hybrid capability
Displays default auto negotiation, speed, duplex, flow, and cross-over settings for a single combo port, a 
range of combo ports, or all combo ports on a switch.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} capability
Syntax Definitions
slot
Slot number you want to display.
port
Port number of the interface you want to display.
port2
Last port number in a range of ports you want to display.
fiber
Specifies that the configuration of the SFP port(s) will be displayed.
copper
Specifies that the configuration of the copper 10/100/1000 RJ-45 port(s) 
will be displayed.
Defaults 
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855
Usage Guidelines
The show interfaces hybrid capability command displays defaults settings in two rows of data for each 
combo port. The first row of data, identified by the label CAP, displays the valid user-defined configura-
tion settings available for the combo port. The second row, identified by the label DEF, displays the 
default settings for the combo port.
Examples
-> show interfaces 1/47 hybrid copper capability
   Slot/Port   AutoNeg     Flow   Crossover      Speed    Duplex
-----------+---------+--------+-----------+----------+----------
  1/47 CAP     EN/DIS   EN/DIS  MDI/X/Auto  10/100/1G  Full/Half
  1/47 DEF         EN       EN        Auto       Auto       Auto
output definitions
Slot
The slot number.
Port
The port number
AutoNeg
In the row labeled CAP this field displays the valid auto negotiation 
configurations for the port. In the row label DEF this field displays the 
default auto negotiation settings for the port. The possible values are 
EN (enabled) or DIS (disabled).