Alcatel-Lucent 6850-48 参照ガイド
Ethernet Port Commands
page 19-98
OmniSwitch CLI Reference Guide
September 2009
show interfaces hybrid pause
Displays the flow control pause configuration for combo ports.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} pause
Syntax Definitions
slot
Slot number you want to display.
port
Port number of the interface you want to display.
port2
Last port number in a range of ports you want to display.
fiber
Specifies that the configuration of the SFP port(s) will be displayed.
copper
Specifies that the configuration of the copper 10/100/1000 RJ-45 port(s)
will be displayed.
will be displayed.
Defaults
If a specific slot or slot/port number is not entered with this command, the flow control pause configura-
tion for all switch combo ports is displayed.
tion for all switch combo ports is displayed.
Platforms Supported
OmniSwitch 6400, 6855
Usage Guidelines
• Enter a slot and port number (e.g., 3/21) or a range of port numbers (e.g., 3/21-24) to display informa-
tion for a specific combo port or a range of combo ports.
• Enter a slot number (e.g., 1) to display information for all combo ports on a specific slot.
• Refer to the Hardware Users Guide for combo port numbering.
• This command is only supported on a standalone OmniSwitch 6855. Use the
command to display similar information on other platforms.
Examples
-> show interfaces hybrid fiber pause
Slot/Port Active Wait time(usec) Cfg-Pause Cfg-Cross Hybrid Type
-----------+--------+---------------+--------+-----------+-----------
1/21 - 0 DIS MDI -
1/22 - 0 DIS MDI -
1/23 - 0 DIS MDI -
1/24 - 0 Tx MDI -